Right Angle (Corner) Doweling; Setting The Collar And Drill Depth For Right Angle Doweling - General E-Z Pro 851 Manual De Usuario

3. Secure your work piece and attach the E•Z Pro Deluxe Doweling Jig Kit to the edge
centering the 2" registration line in the appropriate "V" pointer (Fig. D).
4. Keeping the bushing in the same position re-align jig and drill holes for each dowel
position. Insert dowels, assemble dry to check for fit. Apply glue to dowel pins or
drilled holes for a permanent joint. Once assembled, wipe away excess glue.
C

RIGHT ANGLE (CORNER) DOWELING:

SETTING THE COLLAR
AND DRILL DEPTH
FOR RIGHT ANGLE
DOWELING
For the edge piece, you will be drilling a
1" deep hole and/or the surface piece
you will be drilling a 1/2" deep hole to
accommodate the 1-1/2" dowels.
Therefore, in order to correctly position
the drill collar, you need to add the
thickness of the jig plus the length of
the bushing (1") to the respective
depths before drilling (2" and 1-1/2").
D
6