Panasonic EY37C3 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
4) Power Tool Use and Care
a) Do not force the power
tool. Use the correct
power tool for your
application.
The correct power tool
will do the job better and
safer at the rate for which
it was designed.
b) Do not use the power
tool if the switch does
not turn it on and off.
Any power tool that
cannot be controlled with
the switch is dangerous
and must be repaired.
c) Disconnect the plug
from the power source
and/or the battery pack
from the power tool
before making any
adjustments, changing
accessories, or storing
power tools.
Such preventive safety
measures reduce the risk
of starting the power tool
accidentally.
d) Store idle power tools
out of the reach of
children and do not
allow persons unfamiliar
with the power tool or
these instructions to
operate the power tool.
Power tools are
dangerous in the hands
of untrained users.
e) Maintain power tools.
Check for misalignment
or binding of moving
parts, breakage of parts
and any other condition
that may affect the
power tool's operation.
If damaged, have the
power tool repaired
before use.
Many accidents are
caused by poorly
maintained power tools.
f) Keep cutting tools sharp
and clean.
Properly maintained
cutting tools with sharp
cutting edges are less
likely to bind and are
easier to control.
g) Use the power tool,
accessories and tool
bits etc., in accordance
with these instructions,
taking into account
the working conditions
and the work to be
performed.
Use of the power tool for
operations different from
those intended could
result in a hazardous
situation.
h) Hold power tools by
insulated gripping
surfaces when
performing an
operation where the
power tool may contact
hidden wiring.
Contact with a "live" wire
will make exposed metal
parts of the tool "live" and
shock the operator.
5) Battery Tool Use and Care
a) Recharge only with the
charger specifi ed by
the manufacturer.
A charger that is suitable
for one type of battery
pack may create a risk
of fi re when used with
another battery pack.
b) Use power tools
only with specifi cally
designated battery
packs.
Use of any other battery
packs may create a risk
of injury and fi re.
c) When battery pack
is not in use, keep it
away from other metal
objects, like paper
clips, coins, keys, nails,
screws, or other small
metal objects, that can
make a connection
from one terminal to
another.
Shorting the battery
terminals together may
cause burns or a fi re.
d) Under abusive
conditions, liquid may
be ejected from the
battery; avoid contact.
If contact accidentally
occurs, fl ush with
water. If liquid contacts
eyes, additionally seek
medical help.
Liquid ejected from
the battery may cause
irritation or burns.
6) Service
a) Have your power
tool serviced by a
qualifi ed repair person
using only identical
replacement parts.
This will ensure that the
safety of power tool is
maintained.
II. FOR BATTERY CHARGER
& BATTERY PACK
1. SAVE THESE
INSTRUCTIONS
This manual contains
important safety instructions
for battery charger and
battery pack.
2. Before using battery
charger, read all instructions
and cautionary markings
on battery charger, battery
pack.
3. The charger and battery
pack are specifi cally
designed to work together.
Do not attempt to charge
any other cordless tool
or battery pack with this
charger. Do not attempt to
charge the battery pack with
any other charger.
4. Do not expose charger and
battery pack to rain or snow
or use in damp location.
5. Use of an attachment not
recommended may result in
a risk of fi re, electric shock,
or injury to persons.
6. Do not abuse cord. Never
carry charger by cord or
yank it to disconnect from
outlet.
Keep cord away from heat,
oil and sharp edges.
- 5 -
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido