Installation Procedure For Windows Me Os - Belkin F5U219 Manual De Usuario

Installation

Installation Procedure for Windows Me OS

This installation procedure will successfully install two USB OHCI host
controllers and a single USB 2.0 enhanced host controller.
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as needed until it is fully
seated.
3. Insert the Belkin USB 2.0 driver installation CD into your computer's CD-
EN
ROM drive.
4. After installing the PCI Card, turn on your computer.
5. After loading, the Windows OS will detect "NEC USB Open Host Controller
(E13+)". The required driver support will be automatically installed. No
user input is required.
6. The Windows OS will detect "PCI Universal Serial Bus". This is the USB
2.0 EHCI controller. The "Add New Hardware Wizard" window will appear.
7. Select "Automatic search for a better driver (recommended)". Click "Next".
8. Check the "CD-ROM Drives" box. Click "Next".
9. The Windows OS will locate the driver for "Belkin USB 2.0 Hi-Speed USB
Host Controller". Click "Next".
10. The Windows OS will now install the "Belkin USB 2.0 Hi-Speed USB Host
Controller" driver. Click "Finish".
11. The Windows OS will detect "NEC USB Open Host Controller (E13+)". The
required driver support will be automatically installed. No user input is
required.
12. After installation of the USB host controllers, the Windows OS will detect
"USB Root Hub" and automatically install the required driver support.
This will repeat one more time. Installation of the PCI Card is now
complete.
8 8