HoMedics TOTALCLEAN Guia De Inicio Rapido

READ AND SAVE THESE INSTRUCTIONS
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm level surface.
• Locate the Carbon Odor Filter inside the box and remove the protective plastic bag.
• Install the Carbon Odor Filter and make sure the True HEPA Filter is firmly in place.
1. Open the back grille by pulling the tabs
on both sides of the grille cover
4. The True HEPA Filter will be resting
inside the unit. Make sure the filter is
firmly seated inside the unit with the Air
Flow arrows pointing toward the inside
of the air purifier.
POWER ON/OFF
Plug unit in to a 120 volt AC electrical outlet. Press the Power Button to turn the air purifier on. Press the Power Button a second
time to activate Night Mode and turn off the display lights. Press the Power Button a third time to turn the unit off.
QUICK START GUIDE
2. Open the cover outward until the bottom
grille cover tabs slide away from the unit.
5. Place the bottom grille cover tabs back
into the base. Gently push the grille
cover until the top tabs snap back into
place
3. The top of the Carbon Odor Filter has 2
slots for installation. Hang the Carbon
Odor Filter on the top tabs and secure
under the bottom tabs.
QS-AP25A
MADE IN CHINA