Troubleshooting - Honeywell RTH3100C Serie Guía De Instalación Rápida

Troubleshooting

Troubleshooting
If you have difficulty with your thermostat, please try
the following suggestions.
Most problems can be corrected quickly and easily.
Display is blank • Check circuit breaker and reset if
Heating or
cooling system
does not
respond
necessary.
• Make sure power switch at heating
& cooling system is on.
• Make sure furnace door is closed
securely.
• Make sure fresh AA alkaline
batteries are correctly installed
(see page 7).
• Press SYSTEM button to set system
to Heat. Make sure the temperature
is set higher than the Inside
temperature.
• Press SYSTEM button to set system
to Cool. Make sure the temperature
is set lower than the Inside
temperature.
• Check circuit breaker and reset if
necessary.
• Make sure power switch at heating
& cooling system is on.
• Make sure furnace door is closed
securely.
• Wait 5 minutes for the system to
respond.
17
RTH3100C
69-2340ES—01