Honeywell RTH3100C Serie Guía De Instalación Rápida página 20

Advanced Installation Guide
Troubleshooting
Temperature
settings do not
change
"Cool On" or
"Heat On" is
flashing
"Heat On" is
not displayed
"Cool On" is
not displayed
69-2340ES—01
Make sure heating and cooling
temperatures are set to acceptable
ranges:
• Heat: 40° to 90°F (4.5° to 32°C).
• Cool: 50° to 99°F (10° to 37°C).
• Compressor protection feature is
engaged. Wait 5 minutes for the
system to restart safely, without
damage to the compressor.
• Set the System switch to Heat, and
set the temperature level above the
current room temperature.
• Set the System switch to Cool, and
set the temperature level below the
current room temperature.
18