Velleman NVR1 Guía Rápida página 8

CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
4. Enter the IP address (URI) and port number (PORT).
5. Click SETUP to enter the access information of the camera:
USER NAME
PASSWORD
CACHE TIME (MSEC)
MODEL
GET TYPE
PROFILE
TYPE
IMAGE SIZE
QUALITY
I.P.S.
AUDIO
6. Enter the user name (USER NAME) and password (PASSWORD) to access the IP camera.
7. Click GET TYPE to detect the camera and make sure the access information is correct.
8. Select the image size (IMAGE SIZE), image quality (QUALITY), and images per second (I.P.S.).
Note: The available options depend on the camera you want to connect.
9. Click GET TYPE to detect the camera and make sure the access information is correct.
10. Optional: for a camera with audio recording, set AUDIO to ON or OFF.
Configuring a Remote Internet Camera
Via internet you can record video images from an IP camera in a remote location.
1. Make sure that the IP camera is accessible outside its LAN network via a dynamic domain name (for
example ip_office.ddns.eagleeyes.tw).
2. In the main menu [19], click
V. 01 – 23/03/2012
ADVANCED CONFIG
CHANNEL URI
CH1 192.168.2.197
CH2 10.1.1.14
CH3 10.1.1.30
CH4 10.1.1.12
CH5 10.1.1.16
CH6 10.1.1.13
CONFIG-CH1
(ADVANCED CONFIG) and select CONNECTION.
NVR1
admin
**********
AVTECH
IP CAMERA
PROFILE-3
H264
720 X 480
30
ON
EXIT
8
PORT CONFIG
00088 SETUP
00088 SETUP
00088 SETUP
00088 SETUP
00088 SETUP
00088 SETUP
©Velleman nv