Sirona NITRASEAL Manual Del Operador página 32

5 Operation
12
Operating Instructions NITRASEAL
CAUTION
the yellow indication will stay on for about 3 or 4 seconds
at the end of the sealing. This pause is necessary to avo-
id overheating: during this time it is not possible to carry
out another sealing.
12. In order to seal the opposite side of the envelope
and so block the instrument within its protective co-
ver, the envelope must now be turned and inserted
under the sealing element from the front; then carry
out a new sealing.
CAUTION
In order to avoid the sealing operations along the outer
margins of the heating element, place the sterilisation roll
on its special stand, so that the envelope may slide along
the middle part of the heating element.
Sirona Dental Systems GmbH
61 79 761 D 3367
D 3367.201.02.01.02