Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Top Panel
3
2
1.
Dock – Insert your iPad here, with the Home button facing the right side. Connect iO Mix's dock connector to
your iPad using the included appropriate 30-pin or Lightning connector.
2.
Channel Fader – Adjusts the signal level for each channel.
3.
Peak LED – This LED flashes red when the signal is clipping. If clipping occurs, decrease the channel's fader
or gain setting to prevent distortion.
4.
Hi EQ – Adjusts the high (treble) frequencies for the channel.
5.
Lo EQ – Adjusts the low (bass) frequencies for the channel.
6.
Pan – Adjusts the channel's position in the stereo field.
7.
To Phones – Directs the dock audio to the headphone output.
8.
Limiter – Prevents the signal that is sent to your iPad from overloading.
9.
4 Ch/Mix – Switches between sending four individual channels or a stereo mix to your iPad.
10.
Dock Level – Adjusts the dock audio level returning from your iPad.
11.
Power Display – Illuminates when the unit is powered on and also when the Phantom Power switch is turned
on.
12.
LED Meter – Displays the incoming signal level.
13.
Phones – Adjusts the signal level that is sent to the headphone output.
14.
Main Out Fader – Controls the volume for the Main Out.
15.
Direct Monitoring Switch – Switches the Main Out between monitoring the inputs with low latency or
monitoring the output from your iPad.
16.
Mono Switch – Sets the monitoring of the Main Out to be in mono.
17.
Headphone Out – Connect headphones to this 1/4" jack.
3
3
4
4
5
5
2
2
6
6
3
7
4
4
8
5
5
2
9
6
6
10
10
4
1
11
11
15
15
16
16
12
12
14
14
13
13
17
17
Publicidad
Tabla de contenido
