Knob Switch Operations - koban KPF 01 Manual De Instrucciones

KPF-01
Power harmonic clamp meter
5. LCD display :4-digit digital display; 7-section LCD for displaying
measurement operation function, test result, and unit sign.
6. H/ H/ ：HOLD button: Data hold function press down HOLD button, and
the last reading will be held and displayed on the display, and "HOLD"
symbol will be shown; press HOLD button again, and the meter will switch
back to normal measurement mode.
7. Trigger :Press down the trigger, and the clamp will open; release it, and
the clamp will close.
8. LED Lamp
In power and current mode ,press button open or close Lamp.

Knob Switch Operations

The function-switching knob is used for powering-on and for switching to
any measurement function in the following table.
Knob position description
Sign Knob position
OFF
Powering-off position
KW Active power position
W power position
AC-Current harmonics test
V∽
position
AC-Current harmonics test
A～
position
AC-Current harmonics test
mA～
position
Note:
When the meter is automatically powered off, be sure to switch the knob to
"OFF" position; turn on the meter after 5 seconds.
Instructions manual | 22
Functions
For powering-off
For measuring active power, etc.
For measuring active power, etc.
For measuring AC-voltage
harmonics, etc.
For measuring AC-current
harmonics, etc.
For measuring AC-Current
harmonics, etc.
www.grupotemper.com