Technical Characteristics; Nomenclature Of Parts - KONG Italy CEVEDALE MONO Manual De Instrucciones

8.1 Technical characteristics

- Device dimensions: shown in figure 2
- Maximum load transmitted to the ground: 15 kN (5 kN for each leg)
- Maximum lifting / lowering load, using a manual winch (I): 1,5 kN
- Maximum load that can be applied to a single anchoring point (B/H): 12 kN
- Maximum load that can be applied simultaneously to the anchoring points (B1/H): 15 kN
- Device weight: 20 kg

8.2 Nomenclature of parts

Fig. 1 - A) Top plate in aluminium alloy, B)
Top anchoring points in stainless steel, C)
Extendible legs in aluminium alloy: outer
tube (C1) and inner tube (C2), D) Leg
connecting pin (D1) with related locking pin
(D2) in mild steel, E) Leg opening limiting
cable in galvanised steel, F) Non-slip rubber
support feet, G) Height adjustment holes (fig.
4) in the outer tube (G) and the inner tube
10
(G1-G4), H) Anchoring points in aluminium
alloy located on the leg, I) Manual winch in
aluminium alloy: I1 Self-tailing, I2 Drum, I3
Crank handle, L) "802.000" Back-up" locking
and fall-prevention device in aluminium
alloy, M) "819.000" Heavy Duty" pulley in
aluminium alloy, N) "412.L10" oval connector
in carbon-steel, O) "412.ZZ0" oval connector
in carbon-steel.