Troy-Bilt FLEX Serie Manual Del Operador página 4

Maintenance & Storage
1. Stop the engine and disconnect the
attachment from the FLEX™ Power Base
before cleaning, or inspecting the machine.
2. Stop the engine, disconnect the attachment
from the FLEX™ Power Base and relieve
hydraulic system pressure before repairing
or adjusting fittings, hoses, tubing, or other
system components.
3. To prevent fires, clean debris and chaff from
the engine and muffler areas. If the engine
is equipped with a spark arrestor muffler,
clean and inspect it regularly according
to manufacturers instructions. Replace if
damaged.
4. Periodically check that all nuts and bolts,
hose clamps, and hydraulic fittings are tight
to be sure equipment is in safe working
condition.
Safety Symbols
This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before
attempting to assemble and operate.
Symbol
WARNING!
instructions in this manual and on the machine.
4 S 2 — i
ection mportant
5. Check all safety guards and shields to be
sure they are in the proper position. Never
operate with safety guards, shields, or other
protective features removed.
6. The pressure relief valve is preset at the
factory. Do not adjust the valve.
7. Never attempt to move this machine over
hilly or uneven terrain without adequate
help.
8. For your safety, replace all damaged or worn
parts immediately with original equipment
manufacturer's (O.E.M.) parts only. "Use
of parts which do not meet the original
equipment specifications may lead to
improper performance, compromise safety
and voids the warranty!"
READ THE OPERATOR'S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate.
WARNING— CRUSHING HAZARD
Keep hands away from wedge, end plate, partly split wood and moving parts.
BYSTANDARDS
Keep bystanders, helpers and children at least 10 feet away.
SINGLE OPERATOR
Only one person should operate the machine at a time. The adult who loads and holds log must be the one
who operates control handle.
WARNING— PRESSURIZED FLUID
Never check for hose leaks with your hands. High pressure fluid can escape through a pin hole leak and
cause serious injury by puncturing the skin and causing blood poisoning.
EYE PROTECTION
Always wear safety glasses or safety goggles when operating this machine.
Your Responsibility—Restrict the use of this power machine to persons who read, understand and follow the warnings and
S o p
afe peration racticeS
Description
SAVE THESE INSTRUCTIONS!
9. Do not alter this machine in any manner,
alterations such as attaching a rope or
extension to the control handle, or adding
to the width or height of the wedge may
result in personal injury.
10. According to the Consumer Products
Safety Commission (CPSC) and the U.S.
Environmental Protection Agency (EPA),
Average Useful Life
this product has an
seven (7) years, or 130 hours of operation.
Average Useful Life
At the end of the
the machine inspected annually by an
authorized service dealer to ensure that all
mechanical and safety systems are working
properly and not worn excessively. Failure
to do so can result in accidents, injuries or
death.
of
have