Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Parts included in your hood
Hood structure assembly with blower, transition.
•
Lamp already installed.
•
2 Grease filters 30" or 3 Grease filters 36".
•
•
Duct cover.
Hardware bag with:
•
o
Template
o
Duct cover support bracket (1 piece)
o
Use, care and installation guide
o
Wood screws (6 pieces - 3/16" x 1" 3/4)
o
Concrete wall anchors
(6 pieces - 1/8" x 3/8")
o
Assembly screws (4 pieces)
Optional accessories
Telescopic duct cover to fit ceiling height from 8' to 10'
•
Re circulation KIT
•
Non return valve
•
Materials required
Duct tape
•
•
Wire nuts
Tape to mount template
•
6" rounded metal duct (lenght to suit installation)
•
TOOLS REQUIRED FOR INSTALATION
Measuring tape
Knife
Spirit level
Wire cutter/stripper
Pliers
Safety glasses
Duct tape
Masking tape
CHECK INSTALLATION HARDWARE
Locate the hardware accesories box packed
with the hood
TELESCOPIC DUCT COVER KIT
Accesory not included in the hood
Duct cover
(dimension show for
reference only)
DUCTLESS CONVERSION KIT
Accesory not included in the hood
Wire nuts
Electric drill with
5/16" and 3/8" Bits
Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
9
Hammer
6 wood screws
4 assembly screws
6 concrete wall anchors
Duct cover support bracket
Wall mount template
13-3/32"
From 21- 9/32"
To 33 - 3 /32"
10-19/32"
Air deflector
Charcoal filter
4 springs
Gloves
Strain relief
8?round metal duct,
length to suit installation
Saw, jig saw or
reciprocating saw
Publicidad
Capítulos
Tabla de contenido
