Holmatro PSP40 Manual página 37

• Do not charge a wet battery pack.
• When not in use, store the battery charger in a dry place, locked up securely and out of reach of
children.
• Persons who are not able to use the battery charger in a safe manner, due to their physical, sensory
or mental condition, or due to their inexperience, must not use the battery charger without the
supervision or instruction from a skilled person.
• Strictly observe the minimum and the maximum charging temperature. See section 5.2.
• Do not use a damaged battery charger.
• Do not disassemble the battery charger.
• Risk of short-circuit: use protection for the battery charger against metal objects.
• Do not connect more than 3 mains chargers by daisy chain cables. Refer to Fig. 5.
2.9 Safety regulations with respect to mains connectors
WARNING
• Read all instructions carefully before you use the mains connector.
• Only plug the mains connector into a power supply with the correct voltage and
frequency. Refer to the electrical specifications on the model plate.
• Use protection for the batterry charger against damp or wet conditions.
• Do not use the power cord to move the mains connector. Do not pull the cord to
disconnect the mains connector from the power outlet. Keep the cord away from heat, oil
and sharp edges.
• Do not use the mains connector on a highly flammable surface or in an flammable
environment.
• When not in use, store the mains connector in a dry place, locked up securely and out of
reach of children.
• Persons who are not able to use the mains connector in a safe manner, due to their
physical, sensory or mental condition, or due to their inexperience, must not use the
mains connector without the supervision or instruction from a skilled person.
• Do not use a damaged mains connector.
• Do not disassemble the mains connector.
• Risk of short-circuit: use protection for the mains connector against metal objects.
• Only use the mains connector for powering Holmatro Battery tools.
2.10 Safety regulations with respect to the operation of the system
• Make a risk assessment of the procedure before you start work (EN-ISO 12100).
• Keep bystanders at a distance and be extra careful in the vicinity of people and animals.
• Make sure the work area is clearly laid out and has good lighting.
• Avoid stress and work in a structured way. This reduces the risk of errors, combinations of dangers
and accidents.
• Before use, check the equipment for damage. Do not use the equipment if it is not in good condition
and consult your Holmatro dealer.
• Stand on a stable base and use both hands to hold the equipment.
• Hold the equipment only by its carrying handle and the deadman's handle.
• During operation, never get between the object and the equipment.
• Monitor the situation of the equipment and the structure continuously while using the equipment.
• Parts of an object that could fly off must be secured.
• Use only genuine Holmatro accessories and ensure that they have been attached correctly.
PSP40 916.400.097_002
EN
37