Technical Specifications - Hudora Allround 300 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
handing on the product to a third party. This product must be assembled by an
adult. This product is designed for private/domestic use only. This product is not
designed for commercial/industrial use. The use of the product requires certain
capabilities and skills. Always adjust according to the age of the user and use for
the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Goal Allround 300
Item number: 76906
Dimensions when assembled: 300 x 200 x 110 cm
Purpose: Portable training goal for versatile throwing,
shooting and goalkeeper training.
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de.
CONTENTS
1 x Goal (cf. partlist on pages 2-3)
1 x These instructions
Other items included are meant to facilitate safe transportation and are not re-
quired for the installation and use of the product.
SAFETY INSTRUCTIONS
• WARNING! Not suitable for children under 36 months due to long cords! Stran-
gulation Hazard.
• Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw
connection for stability and fit. Any sharp edges that might have formed must
immediately be removed!
• Warning: Do not climb on the goal frame or net or hang from the goal posts.
There is a serious risk of injury!
• Children should only use the product when they are under adult supervision.
• No liability is assumed for damages resulting from incorrect application of the
instruction manual.
ASSEMBLY INSTRUCTIONS
Notice: The product must be assembled by 2 adults. Lubricate the connection
assemblies on the narrow ends a bit before starting the assembly. That facilitates
the assembly and extends the durability of the product!
1. Assembling the goalpost frame and net
Assemble the soccer goal as shown in figures 1-10.
2. Stand locking of the goal
Mount the rubber pads (15) and finally fix the goal frame to the ground using
the pegs (E) as shown in figure 11. Ascertain that the ground is suitable for the
application of pegs (e.g. no water pipes for sprinkler devices!). Make sure that
the pegs are completely driven into the ground and have a firm position. Avoid
protruding fastenings (risk of stumbling). On too hard grounds the goal must be
secured by appropriate measures in another way against falling over in order to
prevent risk of injuries (e.g. with slabs or sandbags). Never play with an unsecu-
red goal and never leave the goal unsecured.
All images are examples of the design.
USAGE INSTRUCTIONS
• Only set up the goal on level ground.
• Please keep a minimum distance of at least 3 m to any surrounding obstacles.
• Secure the goal to keep it from toppling over – even if not in use.
• Avoid exposing the product unnecessarily to bad weather conditions. Keep it
in a cool and dry storage area.
• Check for any rust on the product and remove it immediately. Pushing together
the metal parts could lead to the protective layer being scratched and rust
developing.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become da-
maged or if sharp edges or corners should develop, the product may not be used
any more. If in any doubt, please contact our service team (http://www.hudora.
de). Store the product in a safe place where it is protected from the elements,
cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point provided in your area. Local waste management companies will be able to
answer your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can fi nd numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de.
7/12