Quick Set-Up - Ingersoll Rand Insight IC1G Manual Del Usuario

Installation
1. Press the Setup Main Menu key. The Quick Setup screen will be displayed.
2. Go to the Select Spindle drop box. Spindle 1 is the default value. If you want to use Spindle 1 go to
Step 3. If you want to use Spindle 2, open the drop box and select Spindle 2.
3. Go to the Configuration drop box, open it, and select the configuration number you wish to program.
4. Press the Expand key and scroll down the list until the cursor is on the type of fastening strategy
desired, press Enter.
5. Use the arrow keys and navigate to the data entry box where you will enter the fastening target value.
• For torque control go to the Torque Target box;
• For angle control go to the Angle Target box;
• For yield control go to the Yield Point % box.
6. Using the numeric keypad, enter a target value appropriate for the strategy selected, and for your
particular fastening operation.
7. Review the default values in the on-screen boxes and edit as desired.
8. Press the Run Main Menu Key (when the dialogue box appears, press Yes if you want to save the
configuration you have just programmed).
© Ingersoll-Rand Company 2004
INSIGHT SET-UP (Continued)

Quick Set-up

Page 6