Ezviz Lc1 Guía De Inicio Rápida página 8

Appendix
Install Memory Card (Optional)
- Remove the door on the side of the camera.
- Remove the silicone plug.
- Insert a microSD card into the slot until a click.
- Put the silicone plug back and make sure it is fully plugged in the SD card slot.
- Place the door cover back on.
Initialize Memory Card
1. In the EZVIZ app, check the memory card status by tapping on the Storage Status in the Device Settings interface.
2. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal.
For detailed information, please visit www.ezvizlife.com.
5