Heath Zenith 7309 Guia De Inicio Rapido página 5

Campana inalámbrica

Tabla de contenido

Idiomas disponibles

3. PROBLEM: Chime sounds when not intended (false triggers).

POSSIBLE CAUSE: Chime is receiving interference from another wireless

device.

CORRECTIVE ACTION: Reset chime and push button.

• Remove push button battery. Wait 30 seconds.

• Press and hold the push button for 10 to 15 seconds within 60 seconds

after installing battery into the push button.

• Press and hold the button on the chime until the chime sounds a "Beep-

Beep-Beep-Beep".

• To re-sync the push button and chime, press and hold the button on the

chime until the chime sounds a "Beep-Beep".

• Press the push button within 30 seconds. The chime will sound a "Beep-

Beep" tone to indicate the push button is synced.

• Press the push button to ensure operation.

Note: The push button and chime come synced from the factory. The range of the

wireless chime can vary with location, temperature, and battery condition.

TUNE – HOLD

1 SECOND.

SYNC – HOLD

3 SECONDS.

RESET – HOLD

10 SECONDS.

Helpful Videos – www.hzsupport.com