Setting The Quantity Of Coffee In A Cup - illy Francis Francis X1 Manual De Instrucciones

setting the quantity of coffee in a cup

1
The X1 machine allows you to brew the desired quantity of coffee in two modes: automatic and manual.
Note: a capsule must be inserted into the capsule holder and then the latter must be inserted into the brew head as described in the chapter
"making coffee".
Automatic mode - to set and memorize the quantity of coffee to be brewed, carry out the following steps:
- Place a cup beneath the capsule holder
- Press the coffee switch down and keep it pressed until the coffee has reached the desired level
3
Release the switch . The machine is now programmed.
Manual mode - to set the machine to work in the manual mode, carry out the following steps:
- Place a cup beneath the capsule holder
- Press the coffee switch down and keep it pressed until the machine automatically stops dispensing coffee
3
Release the switch .
In this case the programming has been cancelled.
Note: in the automatic mode it is also possible to make coffee using the manual procedure.
Carry out the following steps:
2
- Press the coffee switch down
2
- Press the coffee switch down
- In this manner you will not change the quantity of coffee initially programmed
Note: when the machine is set for manual control of the quantity of coffee, after you start brewing it will be necessary to press the coffee
2
switch down again when the coffee has reached the desired level in the cup in order to stop the flow.
30
2
1
.
1
.
for about 3 seconds
again to stop the flow
3
2
.
2
.