5. Insert the lock pole and lock it with
EN
the wing nut, turn the front-assist
handle upwards to point toward
the top of the handle, as shown
in Fig. 7.
6. Adjust the front-assist handle
position between the soft sleeve
housing and warning label on the
shaft (Fig.8). Shorter users may
adjust handle to a lower position
(away from you) and taller users
may adjust the handle to an upper
position (towards you). The handle
should be adjusted so that your
front arm is straight when using the
trimmer.
7. Lock the lever of the lock pole
(Fig.9).
WARNING:
Never operate the
tool without the guard firmly in place.
The guard must always be on the tool
to protect the user! When the guard
was fixed, never attempted to remove
or adjust the guard, if replace needed, it
shall be performed by a qualified service
technician!
16
56V LITHIUM-ION CORDLESS STRING TRIMMER — ST1210E
7
8
9
PACKING LIST
PART NAME
String Trimmer
Guard
Front-assist handle assembly
Operator's manual
56V LITHIUM-ION CORDLESS STRING TRIMMER — ST1210E
EN
QUANTITY
1
1
1
1
17