Selecting The Standard Display; Entering A Name; Loading The Factory-Preset Default Settings - Sennheiser ew 500 G2 Serie Instrucciones Para El Uso

Ocultar thumbs Ver también para ew 500 G2 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Selecting the standard display –
Via the "DISPLY" menu, you can select the standard display:
Selectable standard display
"FREQ"
"NAME"
"CHAN"
Entering a name –
Via the "NAME" menu, you can enter a freely selectable
name for the transmitter. You can, for example, enter the
name of the performer for whom the adjustments have
been made.
The name can be displayed on the standard display and can
consist of up to six characters such as:
letters (without pronounciation marks),
numbers from 0 to 9,
special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
Press the
SET
"NAME" menu. The first segment starts flashing on the
display.
With the
character. By briefly pressing a button, the display
jumps either forwards or backwards to the next
character. If you hold down a button, the display starts
cycling continuously.
Press the
SET
select the next character.
Have you entered the name completely? Press the
button to store your setting and to return to the top
menu level.
Loading the factory-preset default
settings –
Via the "RESET" menu, you can load the factory-preset
default settings. Only the selected setting for the pilot tone
22
NAME
button to get into the setting mode of the
/
rocker button you can now select a
button to change to the next segment and
RESET
DISLPY
Contents of standard
display
SET

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sk 500 g2

Tabla de contenido