Selecting A Radio Channel; Sending A Call; Receiving A Call; Cancelling A Call/Ending A Call - Motorola GM360 Manual De Instrucciones

Selecting a Radio Channel

Using the Menu Navigation Chart on page 7, select
menu mode, then select Channel and scroll through
the channel list until the desired number or alias is
displayed and select the channel.

Sending a Call

Before you can make a call the radio must be in the
IDLE STATE, as displayed above, i.e. a channel has
been selected and no call is in progress.
The radio is capable of making a variety of calls,
including calls to individual radios, groups of radios
and calls to private and public telephone systems.
Please contact your dealer for further information.
10
English

Receiving a Call

1. Turn your radio on and adjust the volume level.
2. Switch to the desired radio channel.
3. If, at any time, a call is received you will hear
the call at the volume level you have set.
Note:The system may have a limited call time and
the call may be terminated automatically if this
call time is exceeded.
Cancelling a Call
At any time while setting up a call it may be cancelled
by pressing the Monitor/Call Cancel button, or
replacing the microphone in its holder (referred to as
going "on hook") .
The call timer can also cancel a call.
Ending a Call
A call should always be ended by pressing the
Monitor/Call Cancel button, or replacing the
microphone in its holder.