Personal Precautions; Preparing The Battery - Schumacher Electric PTI900X Manual Del Propietário

2.

PERSONAL PRECAUTIONS

WARNING RISK OF EXPLOSIVE GASES.
2.1
or engine.
2.2
watches when working with a lead-acid battery. A lead-acid battery can produce
a short-circuit current high enough to weld a ring or the like to metal, causing a
severe burn.
2.3 Be extra cautious, to reduce the risk of dropping a metal tool onto the battery. It might
spark or short-circuit the battery or other electrical part that may cause an explosion.
2.4 Consider having someone nearby to come to your aid when you work near a
lead-acid battery.
2.5 Have plenty of fresh water and soap nearby in case battery acid contacts your skin,
clothing or eyes.
2.6 Wear complete eye and body protection, including safety goggles and protective
clothing. Avoid touching your eyes while working near the battery.
2.7 If battery acid contacts your skin or clothing, immediately wash the area with soap and
least 10 minutes and get medical attention right away.
2.8 If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT
induce vomiting. Seek medical attention immediately.
3.

PREPARING THE BATTERY

WARNING WARNING
3.3 Inspect the battery for a cracked or broken case or cover. If the battery is damaged, do
not use the tester.
3.4 If the battery is not a sealed maintenance-free battery, check the level of each cell and
3.5 If it is necessary to remove the battery from the vehicle to test it, always remove the
ensure you do not cause any arcing.
4. FEATURES
1
8
7
Remove personal metal items such as rings, bracelets, necklaces and
RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS
A HIGHLY CORROSIVE SULFURIC ACID.
3.1 Be sure the area around the battery is well ventilated while
the battery is being tested.
3.2 Clean the battery terminals. Be careful to keep corrosion
from coming in contact with your eyes, nose and mouth.
For testing 6 and 12 volt batteries and 12 and 24
2
volt charging systems. Suggested operation range
32°F (0°C) to 122°F (50°C).
1. Printer Paper
2. Clear Cover
3. LCD Display
3
4. BACK Button
4
5. FORWARD Button
5
6. ENTER: function selection
7. Negative clamp (BLACK, -)
6
8. Positive clamp (RED, +)
36