ION Photon LP Guia De Inicio Rapido página 5

Using Photon LP with Your Computer
Recording
To record music to your computer, you can use EZ Vinyl/Tape Converter. EZ Vinyl/Tape
Converter conveniently saves your recordings to your computer. After you finish converting
your vinyl, you can then burn to CD or load onto portable media devices.
Use the included software download card to download and install the software, and follow the
on-screen instructions. See
starting to record.
To record music to your computer:
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to
connect Photon LP's USB port to an available USB port on your computer.
2. On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu > All
Programs (Windows) or the Applications menu (Mac OS X).
3. Follow the on-screen instructions to set up your recording. When prompted to play your
music, move Photon LP's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or
connect Photon LP's RCA outputs to a stereo system or powered speakers. Do not
connect them to phono-level inputs; Photon LP's RCA outputs are line-level and could
damage a device with phono-level inputs.
4. When you have finished recording, raise Photon LP's tonearm from the record and return
it to its arm clip.
Visit ionaudio.com/computer-optimization
for audio.
Setting Photon LP as the Default Recording Device
Windows XP
Click Start Menu > Control Panel (or Settings > Control Panel in Classic View) > Sound and
Audio Devices. Click the Audio tab and under Sound Recording, select Photon LP as the
default device.
Windows Vista
Click Start Menu > Control Panel (or Settings > Control Panel in Classic View) > Hardware
and Sound > Sound. Click the Recording tab and select Photon LP as the default device.
Windows 7/Windows 8/Windows 10
Click Start Menu > Control Panel > Sound. Click the Recording tab and select Photon LP
as the default device.
Mac OS X
Click the upper-left "apple" icon then click System Preferences > Sound. Click the Input tab.
From the menu, select Photon LP as the device.
Setting Photon LP as the Default Recording Device
for more information on optimizing your computer
before
5