Metra AXM-DC-HF Instrucciones De Instalación página 2

AUX mode
Simply plug in the audio source to the provided 3.5mm or RCA jack(s) and audio
will play over the selected FM frequency.
Note: (1) When AUX mode is in use, Bluetooth mode is disabled.
(2) RDS is not available in AUX mode.
Selecting your FM frequency
There are four FM frequencies to choose from. Grounding the White and Gray wires
in different combinations will set the FM frequency. Below is a flow chart on how to
select you FM frequency.
Gray
Ground
Ground
No connection
No connection
Using the AXM-DC-HF
1. Make sure a connection is made from your Bluetooth device to the AXM-DC-HF.
2. Select the desired FM frequency on your radio.
3. Select audio to play from your Bluetooth device.
4. At this point audio will start playing through your radio.
Note: All controls except volume must be done from the Bluetooth device.
METRA. The World's best kits.
White Frequency
Ground 87.9 MHz
No connection 88.3 MHz
Ground 106.3 MHz
No connection 107.9 MHz
1-800-221-0932
™
AXM-DC-HF
1. When a call is coming in, the radio will need to be on the desired
FM frequency chosen.
2. When a call is coming in, press the answer button once to pick up the call.
3. When you are finished with the call, press the button again to hang up and return
to normal operation.
Note: (1) If you are streaming music when a call is coming in, the call will
interrupt the music.
(2) If you are using the radios other mode options, and not streaming audio,
you will not hear the call coming in.
IMPORTANT WARNING
This product includes instructions for installation which must be carefully followed.
The instructions are worded in such a manner to assume that the installer is capable of
completing these type of electronic installations. If you are unclear as to what you are
instructed to do or believe that you do not understand the instructions so as to properly
and safely complete the installation you should consult a technician who does have this
knowledge and understanding.
Failure to follow these instructions carefully and to install the interface as described
could cause harm to the vehicle or to safety systems on the vehicle. Interference with
certain safety systems could cause harm to persons as well. If you have any questions
in this regard please call the Help line or Metra at 1-800-221-0932 for assistance.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
metraonline.com
Answering phone calls
P
OWER
Metra recommends MECP
certified technicians
© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION