Embroidering Using The Link Function - Baby Lock Endurance II Manual De Instrucciones

Memo
● When connecting multiple embroidery
machines to the computer, use a
commercially available USB hub.
Please note that we recommend using a
self-powered USB hub. Do not use USB
extension cables or repeater cables. For
details on using the USB hub, refer to its
operating instructions.
Embroidering using
the Link function
First, use the embroidery editing software to create
the embroidery pattern to be sent to the embroidery
machine.
Note
● Only embroidery data in the PES format
(.pes) can be embroidered using the Link
function.
● You cannot select .dst data to send from a
computer using the Link function.
● The Link function cannot be used with
large-size (split) embroidery patterns.
● Attach to the embroidery machine the
embroidery frame for the size of the
pattern to be sent.
1 Touch , and then touch
to display page 5 of the machine settings
screen.
2 Touch
When the following message appears,
touch
3
Turn off the machine.
4 Use the included USB cable to connect the
or
embroidery machine to the computer.
11
to enable the Link function.
.