La-Z-Time
PowerRecline
®
Assembly Instructions
9. Identify the electrical components to be used in the following assembly steps (F
vary by style; units with lighted cup holders have additional connections.
10. Locate the motor connector behind the power motion-modular unit (F
unit with a lighted cup holder proceed to step 13.
11. Connect the power supply to the motor connector (F
12. Connect the 120 volt power cord to the power supply (F
instructed in the Operating Instructions. Proceed to step 16 for units without lighted cup holders.
13. Connect the small Y-cable to the motor connector and lighted cup holder connector behind the power
motion-modular unit (F
14).
IGURE
14. Connect the power supply to the small Y-cable (F
15. Connect the 120 volt power cord to the power supply (F
instructed in the Operating Instructions.
16. To remove the backs, unplug the 120 volt power cord from the electrical outlet and disconnect
the power supply from the motor connector behind the power motion-modular unit, or small
Y-cable if unit includes a lighted cup holder. Reverse the Assembly Instructions steps.
F
10
IGURE
PowerRecline
+
Units Without
Lighted Cup Holders
Power
120 Volt
Supply
Power Cord
(PowerRecline
+
Motion-Modulars Assembly Instructions Continued)
20
Motion-Modulars
+
10). Components
IGURE
11). If assembling a
IGURE
12).
IGURE
13). Do not plug in until
IGURE
15).
IGURE
16).Do not plug in until
IGURE
PowerRecline
+
Units With
Lighted Cup Holders
Power
120 Volt
Small
Supply
Power Cord
Y-Cable
La-Z-Time
PowerRecline
®
Assembly Instructions
F
11
IGURE
Motor
Lighted Cup Holder
Connector
Connector (select
units only)
F
13
IGURE
Make this
connection
120 Volt
Power
Power Cord
Supply
F
15
IGURE
Make this
connection
Power
Small
Supply
Y-Cable
Motion-Modulars
+
F
12
IGURE
Make this
connection
Motor
Power
Connector
Supply
F
14
IGURE
Make these
connections
Motor
Small
Cup Holder
Connector
Y-Cable
Connector
F
16
IGURE
Make this
connection
Power
120 Volt
Supply
Power Cord
21