Settings
If the electrical power supply to the Drawer Microwave
should be interrupted, the display will intermittently show
ENJOY
YOUR
MICRO-
after the power is reinstated. If this
TOUCH
CLOCK
occurs, the current Settings option will be erased. Simply
touch Stop/Clear pad and reset.
Audible Signal Elimination
At the end of timed cook, beeps will sound. The audible
To Turn Sound Off
1. Touch Settings pad.
2. Touch Settings pad again.
TOUCH
START
3. Touch Start (+1 min) pad. The display shows
OFF
To Restore Sound
1. Touch Settings pad.
2. Touch Settings pad again.
TOUCH
START
3. Touch Start (+1 min) pad. The display shows
ON
End Of Cooking Reminder
At end of timed cooking, the microwave will signal every
Stop/Clear pad is touched, up to one hour.
To Turn Reminder Off
1. Touch Settings pad three times. The display shows
REMIND
SIGNAL
OFF ?
2. Touch Start (+1 min) pad. The display shows
.
SIGNAL
OFF
To Turn Reminder Signal Back On
1. Touch Settings pad three times. The display shows
REMIND
SIGNAL
ON ?
2. Touch Start (+1 min) pad. The display shows
.
SIGNAL
ON
Auto start
To program the Drawer Microwave to begin cooking
automatically at a designated time of day, follow this
procedure.
CAUTION
To maintain food safety, do not leave food in
the oven for more than one hour before or after
cooking.
WAVE
TOUCH
CLEAR
TOUCH
AGAIN
SOUND
OFF ?
SOUND
TOUCH
AGAIN
SOUND
ON ?
SOUND
.
TOUCH
START
REMIND
.
TOUCH
START
1. Touch Settings pad 4 times. The display shows
AUTO
START
2. Touch Start (+1 min) pad.
ENTER
START
AND
3. Enter start time.
4. Touch Timer/Clock pad.
5. Touch the number pads to enter cooking time.
TOUCH
START
Touch Power Level pad repeatedly until the desired
power level is reached.
6. Touch Start (+1 min) pad.
Demonstration Mode
To select Demo Mode
1. Touch Settings
DEMO ON?
2. Hold Start (+1 min) pad for 3 seconds. The display
shows
DEMO ON .
To cancel Demo Mode
1. Touch Settings
DEMO
OFF ?
2. Touch Start (+1 min) pad. The display shows
OFF
Note:
• Drawer Microwave doesn't heat in Demo Mode.
•
Standby Mode
This microwave will go into standby mode after a period
of inactivity. The backlight of the display will automatically
dim after 3 minutes if the unit has not been in operation.
If the display is in standby mode, simply touch the control
panel or open/close the door to return the backlight to
maximum brightness.
More or Less Time Adjustment
To increase cooking time for any of the Sensor Reheat,
REMIND
the Power Level pad once after touching your selection.
The display will show
To decrease cooking time, touch the Power Level pad
twice after touching your selection. The display will show
.
LESS
.
TOUCH
START
TIME
4:30
TOUCH
CLOCK
ENTER
COOKING
OR
TOUCH
POWER
TOUCH
START
HOLD
START
3 SEC
.
TOUCH
START
.
MORE
TIME
20.00
LEVEL
.
DEMO
English 16