Dorma MATRIX AIR Instrucciones De Montaje Y De Manejo página 36

DOOR FITTING MATRIX AIR
—
4.3 Requirements on the door
Drill the holes according to the hole pattern and mount the blind-rivet nuts using the
appropriate setting tools. For the safety screw (optional), drill a hole through the frame.
4.4 Mounting the door fitting
Check whether the door handle is coupled in before you start with the installation. After the
installation of the door handle, position the front panel and slide it up.
You will need the enclosed blind-rivet nuts
for the installation.
2 x Ø 7 mm
2 x Ø 7 mm
12 DORMA
Ø 7mm
Ø 21.5 mm
EN