Williams Sound Pocketalker PKT 2.0 Manual Del Usuario página 9

Internal Microphone
External Microphone
Jack
11. Adjust the tone according to your preferences. Turning the tone
control towards the top (+) boosts the treble (high frequency).
Clip
Turning the tone control towards the bottom (-) boosts the bass
(low frequency). The white dot on the dial indicates the normal
position (no treble or bass boost).
Tone Adjustment Dial
Pocketalker
Balance
Adjust
Left Right
(Mono)
More
treble
Adjust
More
bass
nt
Using the built-in T-coil with a Loop System
The Pocketalker can be used with loop systems. When the T-coil
switch on the Pocketalker is enabled, the Pocketalker disables the
Headphone/
microphone input, picks up the loop signal, and sends the audio
Earphone
Jack
through the headphone jack.
Tone
t
Adjust
To use this feature:
Follow the "Getting Started" instructions and instead of step 8,
Tone Adjust
flip the T-coil switch to the "T-coil" position (up towards the T-coil
Rotary Dial
symbol). The T-coil "On" LED indicator above the switch will light
up.
2.0: Left Side View
®
Headphone/
Earphone
Balance
Jack
Control
(Fully
counter-
clockwise
= Mono)
Tone Adjust
Rotary Dial
Power On
Volume+
Adjust
Dial
Volume-
Power Off
(Fully
counter-
clockwise
= Mono)
Power On
Tone
Volume+
Adj.
More
Tone
Dial
treble
Adjust
Adjust
Dial
Adjust
Volume-
Power Off
More
bass
Normal
position
(dot in
center)
Power "On"
Green LED
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
More
Dial
treble
Adjust
More
bass
Normal
position
(dot in
center)
Power "On
Green LED
Power On/
and
Volume Ad
Rotary Dial
T-coil
Switch
T-C
Lanyard Sl
T-C
T-C
(in
Ch
ind
US
Ch
9