Safety Features; Pit Stop - Python 4105P Manual Del Usuario

Safety Features

The following safety features will disable the remote start when acti-
vated or not allow the engine to start if not properly set before starting.
• Foot Brake is depressed
• Hood is opened
• Remote Start shutoff switch is OFF
• The pre-programmed run time (12, 24 or 60 minutes) has elapsed
• Remote Start activation procedure is repeated
• Parking brake is disengaged
• Engine over-rev protection (Tachometer mode only)

Pit Stop

This remote start can keep the engine running during short trips away
from the vehicle.
To enable Pit Stop mode:
1. Park in a well ventilated area.
2. With the engine running set the transmission in the park position
and ensure the parking brake is set.
3. Press and release the
system has been programmed to activate the remote start), the
parking lights turn on to confirm.
4. Turn off the ignition and remove the key, the engine continues
running.
5. Exit and secure the vehicle, the engine runs for the programmed
runtime.
Important: This feature will not work if the brake pedal is being pressed.
8
button once (or the amount of times the
© 2015 Directed. All rights reserved.