Using The System; Locking; Unlocking; Disabling (Optional) Starter Kill - Python 4105P Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The system remains in timer mode and will start every three hours for a
maximum of six starts unless cancelled by turning on the ignition, or by
activating any of the shutdown inputs to the system.
The parking lights flash four times indicating timer mode is exited.

Using the system

Locking

Pressing
for one second locks the system (if the door locks are con-
nected). The horn honks and the parking lights flash once to confirm the
system is locked. The Failsafe
the vehicle's starter from cranking.
Important note: Horn honk and Failsafe are both optional features.

Unlocking

Pressing
for one second unlocks the doors (if connected). The horn
honks twice and the parking lights flash twice to confirm unlocking of
the system. The Failsafe Starter Kill is deactivated.

Disabling (optional) Starter Kill

If your remote control is lost or damaged, you can manually override
the starter kill. To do this, you must have the ve hi cle's ignition key and
know where the Valet button is located. Be sure to check with the in-
staller for the location of the Valet button.
To override the starter kill, turn the ignition on and press and release the
valet button within10 seconds. The vehicle should start. If it does not
start, you may have waited too long; turn the ignition off and repeat
the process.
© 2015 Directed. All rights reserved.
Starter Kill also activates and prevents
®
5

Publicidad

Tabla de contenido
loading

Tabla de contenido