Alto ZMX862 Manual De Inicio Rápido página 4

17. 2-TRACK INPUTS – You may connect these inputs to the outputs of an external sound source using a
standard stereo RCA cable (sold separately). You can send this channel to the monitor mix (using the
MAIN/2-TRACK switch) and/or the main mix (using the 2-TRACK TO MAIN switch).
18. 2-TRACK OUTPUTS – You may connect these outputs to the inputs of an external recording device
using a standard stereo RCA cable (sold separately).
19. CTRL ROOM OUTPUTS – Use standard 1/4" cables to connect these outputs to your monitor or
amplifier system. The level of these outputs is controlled by the CTRL ROOM / PHONES knob.
20. MAIN MIX OUTPUTS – Use standard 1/4" cables to connect these outputs to the house speaker or
amplifier system. The level of these outputs is controlled by the MAIN VOLUME knob.
21. PHONES – Connect your 1/4" stereo headphones to this output. The CTRL ROOM / PHONES knob
controls the volume.
22. AUX RETURN TO MAIN MIX – Adjusts the volume of the signal being sent into the AUX RETURN
INPUTS and routed to the MAIN MIX OUTPUTS.
23. AUX RETURN TO AUX 1 MON – Adjusts the volume of the signal being sent into the AUX RETURN
INPUTS and routed to the CTRL ROOM OUTPUTS.
24. 2-TRACK IN LEVEL – Adjusts the input signal level of the AUX INPUTS.
25. CTRL ROOM / PHONES – Adjusts the volume of the CTRL ROOM OUTPUTS and your headphones.
26. MAIN / 2-TRACK – Press this button to select which signal is routed to the CTRL ROOM OUTPUTS
and your headphones – the main mix or the signal from the 2-TRACK INPUTS.
27. 2-TRACK TO MAIN – Press this button to select which signal is routed to the MAIN MIX OUTPUTS –
the main mix or the signal from the 2-TRACK INPUTS.
28. MAIN VOLUME – Adjusts the volume of the MAIN OUT.
29. LED METERS – Shows the audio level of the main mix. Turn the volume down if the CLIP LED lights
up excessively.
30. PHANTOM POWER – This switch activates and deactivates phantom power.
phantom power supplies +48V to the XLR mic inputs and the LED above the switch will be lit. Please
note that most dynamic microphones do not require phantom power, while most condenser
microphones do. Consult your microphone's documentation to find out whether it needs phantom
power.
31. POWER LED – Illuminates when the mixer is on.
4
When activated,