Tabla De Contenido; Introduction - SOMFY Chronis io Manual Del Usuario

1. Introduction
2. Safety
2.1. Safety and liability
2.2. Specific safety instructions
2.3. Compatibility
3. Contents
4. The Chronis io in detail
4.1. Front
4.2. Screen in manual mode
4.3. Screen in automatic mode
4.4. Screen in simulated presence mode
4.5. Back
5. Commissioning
5.1. Battery installation and replacements
5.2. Initial configuration
5.3. Adding or deleting a Chronis io at an
end-product
5.4. Initial setting of the date and time
parameters
5.5. Programming the days of the week

1. INTRodUCTIoN

The Chronis io is a wall-mounted wireless control with timed programming which permits the
simultaneous manual or automatic control of one or more io-homecontrol
awnings, blinds, roller shutters, lights, skylights, etc.
The Chronis io can be used in 3 ways: in manual mode, automatic mode or in simulated presence
mode.
Manual mode allows the user to send occasional orders to one or more end-products in the
home and deactivate the programming of automatic orders.
Automatic mode
set up the weekly, day-by-day programming known as: automatic orders. Up to 4 automatic orders
can be programmed for each day of the week.
It is also possible to send occasional orders to one or more end-products.
Simulated presence mode
randomly modifying (by + 1 to + 30 min) the time at which orders programmed in automatic mode are
activated. This mode is specially recommended to simulate your presence when you are away from
your house for an extended period of time.
It is also possible to send occasional orders to one or more end-products.
(*) io-homecontrol : radio control system developed by Somfy and its io-homecontrol
®
system controls motors and automated devices that incorporate this technology (radio protocol) in
the home. For more information about
io-homecontrol technology, please go
®
to www.io-homecontrol.com.
Copyright © 2013 Somfy SAS. All rights reserved.
CoNTENTS
1
2
2
2
2
2
3
3
3
3
3
3
4
4
4
6
6
7
permits the automatic control of one or more end-products after you have
permits the automatic control of one or more end-products by
6. Installation
6.1 Recommendations
6.2 Attaching the wall mount
6.3 Clipping on and unclipping the
Chronis io from its wall mount
7. Operation
7.1. Manual mode
7.2. Automatic mode
7.3. Simulated presence mode
7.4. Modifying the programming of
the days of the week
7.5. Modifying the date and
time parameters
8. Tips and recommendations
Questions about the Chronis io?
9. Technical data
Chronis io
10
10
10
10
11
11
11
12
12
12
13
13
13
* end-products such as
®
partners. The
®
1