Installing The Interactive Display Speakers; Audio Connection Diagram; Cabling Instructions For The Interactive Display - smart Board 8070i Guia De Instalacion

I N S T A L L I N G Y O U R I N T E R A C T I V E D I S P L A Y

Installing the interactive display speakers

Your interactive display comes with two 15 W speakers.
I
I M P O R T A N T
Install the speakers on your interactive display before installing the interactive display on the
wall. Install the speakers while the interactive display is either still in its product packaging or
suspended from a lifting device.

Audio connection diagram

g
To connect the speakers
1. Attach the supplied speakers to the side of the interactive display with the included
screws.
2. Connect the speaker wires to the speaker connectors found on the right side of the back of
your interactive display.

Cabling instructions for the interactive display

Your interactive display must be connected to a computer and a power source. The installed
computer connections consist of:
A room computer connected to both the USB #1 and the VGA connector. This is the default
l
computer for the interactive display.
5 | 99-01112-2 A0