Chicco SMART 260 Manual Del Usuario página 14

ble batteries being charged via the mains adapter
(1) are fully charged.
b) flashing green: the parent unit is on but is not
transmitting (menu browsing in progress)
c) steady red: the rechargeable batteries in the
OFF parent unit are being charged
d) OFF: the parent unit is off and rechargeable
batteries being charged via the mains adapter
(1) are fully charged.
Alarm indicating the absence or loss of the link with
baby unit.
- Every time the link with the baby unit is absent or
lost an acoustic alarm will sound and the absence/
loss of link screen will appear (10).
- When the link with the baby unit has been restored,
the alarm is deactivated and the regular audio and
video signal will be restored in real time.
WARNING: the performance of the product may
be compromised if multiple monitoring devices are
used at the same time.
Rechargeable batteries almost flat alarm.
- An acoustic alarm sounds when rechargeable bat-
teries run out of power and the flat battery icon (5)
appears on the display (3).
- If you want to continue using the device it is ad-
visable to recharge the batteries in the parent unit
(11), otherwise the device will stop working prop-
erly and turn off. Charge the rechargeable batteries
(11) by connecting the mains adapter (1) to the
parent unit power and charging connector (7). The
acoustic alarm will switch off when the batteries
start charging.
Charging rechargeable batteries.
- For quicker results, charge the batteries by connect-
ing the off parent unit to the mains adapter (1). In
this case the indicator light (6) will come on red and
will switch off when the batteries are fully charged
(at least 8 hours).
- The parent unit can still be used while the batteries
are charging, but it will take longer for them to fully
charge. The battery icon (1) will appear on the dis-
play (3) with the internal power levels coming on in
succession. Leave the batteries to charge until the
steady icon (1) appears on the display (3).
Managing the internal menu
- By pressing the central menu adjustment button (4)
you can access the main menu, access the second-
ary menus and confirm the functions/settings you
have chosen.
- The side menu adjustment buttons (4) allow you to
browse the main menu (12) and the secondary men-
us (13-16) in order to select the available functions.
The following functions can be selected from the
main menu:
Adjusting the brightness of the parent unit dis-
play (3) from the corresponding menu (13).
4 levels of brightness are available.
Having set this function you are automatically taken
back to the main menu (12).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Adjusting the volume of the parent unit speaker
(5) from the corresponding menu (14).
4 levels are available.
Warning: The speaker cannot be completely deacti-
vated.
Having set this function you are automatically taken
back to the main menu (12).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Setting night vision from the corresponding
menu (15).
In the event of reduced light or darkness in the room
in which the baby unit is positioned, it is possible to
activate the baby unit infrared lighting system (6) so
it is also possible to see in poor light.
WARNING! when night vision is active the icon
(9) will appear on the parent unit display (3) and the
colours of the images will be impaired, and in the
event of darkness the images will be seen in black
and white. This is normal.
Having set this function you are automatically taken
back to the main menu (12).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Setting and adjusting the Voice Activation func-
tion from the corresponding menu (16).
The parent unit can function in continuous transmis-
sion mode or Voice Activation mode. It is possible to
choose from 4 different voice activation sensitivity
levels. The highest level corresponds with its func-
tioning in continuous transmission.
When the level of noise detected by the baby unit
microphone (7) is lower than the thresholds pre-es-
tablished for each level by the manufacturer, the par-
ent unit goes into stand-by, deactivating the video
and audio. The video and audio will reactivate if the
baby unit detects sounds that are above the thresh-
olds pre-established by the manufacturer.
Having set this function you are automatically taken
back to the main menu (12).
If you do not set it, after a few seconds you will auto-
matically come out of the menu.
Launching the procedure to restore the pairing
between the baby unit and the parent unit.
If the baby unit and the parent unit are consistently
unable to communicate (continuous disconnection
alarm and disconnection screen), even when just a
14
few
init
wh
The
pro
Ho
aro
red
vid
if n
(10
Sel
is p
ma
Aft
tha
Aft
tion
tan
set
a fa
has
par
cor
3. F
B
by
- O
un
- Al
fla
fo
ba
da
- D
NB
wit
run
con
run
- D
te
- Th
ba
ard
CH
- Ne