Technical Data - Chicco SMART 260 Manual Del Usuario

few centimetres from each other, it is advisable to
dis- initiate the pairing procedure from the main menu
which is performed by the manufacturer by default.
The following pairing screen (11) appears when this
ken process is launched.
Hold the baby unit pairing button (5) down for
uto- around 4 seconds. The baby unit light (3) will flash
red. If the procedure concludes successfully, the
video screen will appear on the display in real time;
ker if not, the absence/loss of signal screen will appear
(10). If necessary repeat procedure.
cti- Leaving the main menu.
Select this icon to leave the main menu. If no button
ken is pressed, after about fifteen seconds you will auto-
matically come out of the menu.
uto-
WARNING!
After switching the parent unit on, always make sure
ing that the child unit is on.
After switching on the unit, always check that recep-
om tion of the transmitted signal is possible at the dis-
e to tance and/or in the areas within where it has been
so set. It is advisable to carry out a test with the help of
a family member from the room where the child unit
has been placed, moving simultaneously with the
con parent unit in areas where it has been set, to verify
the correct reception of the transmitted signal.
the
3. FITTING AND REPLACING THE RECHARGEA-
ack
BLE BATTERIES IN THE PARENT UNIT.
ken
WARNINGS: These steps must be done only
by an adult.
uto-
WARNING: RECOMMENDATIONS FOR BATTERY USE
nc- - Only use rechargeable NiMH batteries for the parent
unit with code 20093290000.
mis- - Always remove the rechargeable batteries when
e to flat and/or when you will not be using the product
vity for an extended period of time. This prevents flat
nc- batteries from leaking the liquid they contain and
damaging the parent unit and/or objects nearby.
unit - Do not short-circuit the battery poles.
es- NB: if the duration of rechargeable batteries supplied
par- with the parent unit is reduced excessively, they have
deo run out and therefore must be replaced (this is to be
the considered normal because rechargeable batteries
sh- run out over time).
- Do not attempt to recharge non-rechargeable bat-
ken teries: they may explode.
- This product is not designed to work with lithium
uto- batteries.
WARNING: improper use may create haz-
ardous conditions.
ing
WARNING: RECOMMENDATIONS FOR RE-
ntly
CHARGEABLE BATTERY USE.
ion
st a - Never leave flat rechargeable batteries in the parent
unit. Recharge immediately (or replace if run out) as
they could leak corrosive and/or dangerous liquids.
- If the batteries should leak liquid, adequately pro-
tect hands and replace the batteries immediately,
taking care to thoroughly clean the battery com-
partment and anything else touched by the liquid.
Wash your hands thoroughly when finished. Do not
mix batteries of different brands or types and flat
batteries with new ones.
- Insert the 3 x 1.2V, NiMh, 1600mAh AA rechargeable
batteries (included) in the parent unit, making sure
that the polarity is correct, as indicated in the bat-
tery compartment.
- Remove rechargeable batteries from the product
before disposing of it.
- Do not leave rechargeable batteries and/or any
tools for their removal within the reach of children.
- Do not dispose of rechargeable batteries in fire or
throw them away carelessly or in the household
waste.
- Recycle used batteries in accordance with applica-
ble laws.
- In case of prolonged non-use of the product, always
remove the batteries.
3.1 Fitting the rechargeable batteries supplied
in the parent unit.
When purchasing the product, the rechargeable bat-
teries (11) for the parent unit are packaged separately
in the product packaging.
- Carefully remove the rechargeable batteries (11)
from their packaging.
- Remove the rechargeable battery compartment
closing panel (10) (fig.1).
- Insert three 1.2 V rechargeable NiMH AA batteries,
making sure that the polarity is correct, as indicated
in the battery compartment.
- Replace the rechargeable battery compartment
closing panel (10) (fig.2).
3.2 Replacing the rechargeable batteries in the
parent unit.
If the duration of the rechargeable batteries supplied
with the parent unit is reduced excessively, they have
run out and therefore must be replaced (this is to be
considered normal because rechargeable batteries run
out over time).
- Remove the rechargeable battery compartment
closing panel (10) (fig.1).
- Remove the rechargeable batteries (2) that have run
out and replace with rechargeable batteries that are
identical to those supplied with the product: NiMh
1.2V, 1600mAh, AA (code 20093280000) making sure
that the polarity is correct, as indicated in the battery
compartment.
- Replace the rechargeable battery compartment
closing panel (10) (fig.2).

TECHNICAL DATA

- Voice transmission via FHSS digital technology system.
15