Mp3/Auxiliary Connection; Setting Time And Alarm - riptunes CDB300 Guia Del Usuario

MP3/AUXILIARY INPUT CONNECTION
This product is equipped with an auxiliary input jack that allows you to connect an MP3 player, smart phone,
or other compatible electronic device when plugged in with an appropriate auxiliary cable.
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player or external device
2. Connect the other end of the cable to the Aux-In jack on the Portable CD/MP3 Boombox. (Refer to
diagram on page 6 of this manual).
3. Turn on the unit and press the
4. Turn on your external device, such as an MP3 player, and follow the playback instructions.
5. To terminate this function, turn off your external device.

SETTING TIME AND ALARM

You can set the time and an alarm on your Portable CD/MP3 Boombox.
Setting the Time
1. From STANDBY mode, press and hold the
2. Press the /
3. Press the button again to set the minutes. Press the
4. Press the button to confirm
Setting the Alarm
1. In STANDBY mode, press and hold the
2. Press the /
3. Press the button again. Press the
4. Press the button again to confirm alarm time.
5. Press the button to select the alarm source. Continue pressing and releasing to cycle through the
choices: bb (for buzz sound)/ FM (last radio station tuned)/ AM (last radio station tuned)/ CD/ OFF).
The alarm can be temporarily turned off manually by pressing the SNOOZE button. The alarm will turn again
automatically after 9 minutes.
Press the FUNCTION button to disable the alarm when it activates.
FUNCTION button until AU is displayed.
buttons to set the hour.
buttons to set the hour of the alarm.
button for 2 seconds and the hour begins to flash.
/
for 2 seconds and the clock begins to flash.
/ buttons to set the minutes.
- 12 -
buttons to adjust the minute.