Fujioh FSR-30 Manual De Instslacion página 10

(2) Loosen the mounting screws
attaching the rectifier panel, pull
the rectifier panel forward slightly
to free the mounting screws from
the mounting guide holes and the
body catches.
Note
Use a screwdriver if they are tight.
(3) Remove the fan case cover by
removing 4 screws.
In Case of 3¼" × 10" Vertical Discharge

Mount the supplied 3¼"×10" rectangular
duct joint on the top plate with 4 screws
(2 pieces: removed in Step 4-1, the
others: supplied).
Then attach the supplied soft tape
around the duct joint.
10
INSTALLATION (continued)
Mounting screw
Rectifier panel
Fan case cover
Soft tape
Catch
The wider side
comes in front
Duct joint