Connecting Power Supply Wires - Fujioh FSR-30 Manual De Instslacion

3. Connecting Power Supply Wires

WARNING
• Electrical wiring should be done by a qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction. An unqualified person doing the
work could result in fire, electric shock or injury.
• This range hood uses 120V AC. Do not connect to other voltage since fire, electric shock
or damage could result.
1
Remove the nut from the conduit connector
at the end of power wiring.
WARNING
• Be sure to switch power OFF at service panel
before wiring.
2
Connect the conduit through the connecting hole
of the body using the nut previously removed.
3
Connect wires tightly and securely using
wire connectors (not supplied).
Connect the electrical wires as follows:
• Black to Black
• White to White
• Green to Green
4
Make sure that all wires are connected
properly and enclosed inside of the
wiring compartment.
INSTALLATION (continued)
Conduit
Nut
Wire Connector
(not supplied)
Power
wiring
Range
hood
Range hood
Wire (unit side)
Conduit
(Not supplied)
Nut
(Not supplied)
Conduit
Wire (conduit side)
13