Parts Description; Operation And Maintenance - Tristar WK-1325 Manual De Usuario

Instruction manual

PARTS DeSCRIPTION

1. Lid release button
2. On/Off switch
3. Removable filter
4. Water gauge
5. Handle
6. Indicator
7. Base with cord storage
1
3
4

OPeRATION AND MAINTeNANCe

• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main
voltage of your home. Rated voltage : AC220-240V 50/60Hz.
• Do not use the device near a sink filled with water. If the device
has fallen into the water first pull the plug from the outlet.
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
2
USe
• The kettle should be used exclusively for boiling water; never
use it with other liquids or ingredients. Before the first use boil
a full kettle of water to clean the kettle and discard this water.
You can open the lid by pressing the lid release button (No. 1).
4
• Always remove the kettle from the base (No. 7) when filling
it, this to avoid water dripping into the base. Always fill the
5
kettle between the minimum and maximum level markers,
see the water gauge (No. 4). The maximum filling is 1,2 liters.
If insufficient water is used, the kettle will switch off, with too
much water it may boil over.
• Switch the device on by pressing at the on/off switch (No. 2).
• The indicator lamp (No. 6) will be illuminated. Once the water
6
has boiled, the on/off switch returns automatically to the off
position.
7
• If the appliance is accidentally switched on when empty, the
boil-dry protection will automatically switch it off. Adding
cool water will cool the boil-dry protection mechanism which
enables you to use the kettle as normal.