Samsung NQ70R5511D Serie Manual De Instalación página 13

Barrier
A
C
B
A. Trim Left
B. Trim Bottom
C. Screw
Install_NQ5300R_NQ70R5511DG_AA_DG68-01149A-02_EN.indd 13
3. Push oven completely into the cabinet
and center the oven into the cabinet
cutout.
4. Remove the tape from front trims.
• Securely fasten the oven to the
cabinet using the screws provided.
• Insert the screws through hole in
trim aligning with hole in lower
oven frame. Do not overtighten
screws.
WARNING
When inserting the oven, use caution not to
deform or damage the barrier underneath.
5. The bottom metal trim are shipped in
the foam packing.
To install the metal bottom trim, see
following instructions.
• Align tab of the bottom trim with a
hole in the left side trim of the unit
as shown. Repeat on the right side.
• Using one screw on each side
of the trim tab, fasten the trim
securely to the oven.
CAUTION
Lower oven door should be removed, before
fastening the trim.
6.
A
C
The upper oven can be fixed with 4 screws,
and the lower oven with 2 screws.
B
A. Trim Left
B. Trim Bottom Large
C. Screw
If the cutout size is larger than
1.5 inches use of the wider bottom trim
is recommended.
NOTE
English 13
2019-05-09 12:05:55