Royal Sovereign HUT-100 Manual Del Propietário página 5

1. Position the fan heater on a firm level surface and at a safe distance from wet locations or flammable objects.
2. Connect the fan heater to the proper electrical .
3. Press power button to Fan or Heater Position.
4. Set the thermostat dial to the maximum temperature.
5. Once the room reaches the desired temperature, turn the thermostat dial back until heating element turns off. The heater
will cycle automatically around this present temperature. To increase temperature, turn the thermostat knob clockwise. To
lower temperature, turn the thermostat counterclockwise.
Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce
the risk of fire, electrical shock and injury to persons.
Do not use this appliance if any part of it has been underwater. Immediately call a qualified service
technician to inspect the appliance and replace any part of the electrical system which has been under
water.
grounding Instructions:
Ensure the heater is switched OFF before plugging the heater into the outlet. Connect to properly grounded outlets
only. Note: The power cord has a polarized plug (with one blade wider than the other) that will only fit in a polarized
outlet one way. If it does not insert easily try reversing the plug. If it still does not fit contact your electrician to
replace your outlet. DO NOT defeat the safety purpose of the polarized plug.
5
HUT-100