Cleaning And Care - FLORABEST 352181 2007 Instrucciones De Utilización Y De Seguridad

Set the product on a level, firm
surface.
This product is not a toy and
should only be used under adult
supervision.
Check the product for damage
before using it.
Please note the maximum weight
capacity of 50 kg. Exceeding
this weight limit may result in in-
juries and / or property damage.
Do not sit or stand on the product.
Do not fix an umbrella to the
edge of the table under any cir-
cumstances. This could result in
injuries and / or damage to the
product.
Assembly instructions
1. Place the tabletop
flat surface during assembly
(Caution: hard surfaces may
scratch the tabletop).
2. Connect the long frame section
of the table frame
frame section
Now take 4 screws
screw them into the holes using
the key . Secure the screws
9
with the washers
figures B and C.
10 GB/IE
on a soft,
1
to the short
2
(see fig. B).
3
and
6
6
, as shown in
7
Note: Do not fully tighten the
screws before putting the
6
glass top on the frame.
1
3. Repeat this process on the oppo-
site side of the table.
4. Place the two struts
table frame and connect them
using 4 screws
5. Carefully lay the tabletop
the table frame.
the glass top
ened frame.
6. Tighten all the screws
with cover cap
figure B and C.
7. Adjust the height of the table by
using the leg with adjustable
height for maximum stability.

Cleaning and Care

Clean the product and remove
stains with a damp cloth and a
mild cleaner.
Use a soft sponge and clean
water to clean dirt off this product.
Allow all parts to dry well before
packing up the product. This will
prevent mould, odour and
discolouration.
on the
5
each.
6
on
1
Falling risk of
on the untight-
1
. Secure
6
, as shown in
8