Using An Optional Chargepak F1; Installing A Chargepak - PURE Evoke F4 Manual De Instrucciones

Using an optional ChargePAK F1

ChargePAK makes your Evoke truly portable, so you can enjoy the programs you love in the yard or at the
beach.
Because it's rechargeable, ChargePAK is much cheaper than regular batteries. It's also more eco‑friendly
because it reduces the amount of toxic substances sent to landfill. And, because it's a fit‑and‑forget
solution that charges whenever your radio is connected to the power outlet, it's much more convenient
than standard rechargeable batteries.

Installing a ChargePAK

1. Switch your Evoke off and disconnect it from the power supply.
2. Open the battery compartment and position ChargePAK so that the Pure label is facing the
battery compartment lid and ChargePAK's contacts line up with the three terminals in the battery
compartment.
3. Replace the battery door and connect your product to a power outlet.
4. ChargePAK will begin charging. When charging your ChargePAK for the first time or after an
extended period of inactivity we recommend that you charge it for around 24 hours to ensure full
battery power.
Note: It is normal for your ChargePAK to get warm, especially during charging. Your ChargePAK will give
years of trouble‑free use under normal circumstances, but like all rechargeable batteries its efficiency will
gradually reduce with age.
Important: Evoke can only be powered with a Pure ChargePAK F1 and is not compatible with any other
batteries, either disposable or rechargeable, or any other ChargePAK model.
EN
21