Configuration Functions - Promax OP-170-E Manual De Instrucciones

OP-170-E USER'S MANUAL
Press the encoder key to access the first echo parameters definition:
Amplitude: Turns this tap ON/OFF or sets its amplitude level from 0 down to —40
dBc in 0.1 dB steps.
Phase: Tap phase from 0° to 359.9° in 0.1° steps.
Doppler: Doppler shift frequency to define static (0 Hz) or dynamic (from ±
830 Hz) taps.
ECHO n: Defines the settings for each channel tap referred to the echo set as
reference.
Amplitude: Turns this tap ON/OFF or sets its amplitude level from 0 down to —40
dBc in 0.1 dB steps.
Phase: Tap phase from 0° to 359.9° in 0.1° steps.
Doppler: Doppler shift frequency to define static (0 Hz) or dynamic (from ±
830 Hz) taps.
Delay: Depending on the channel BW, this is the echo delay referred to
echo 1 and variable in 100 ns steps.

2.4 CONFIGURATION functions

The following options have been added to this menu:
Save C/N & Echoes: The MO-170 stores in memory the parameters related to
C/N & Echoes previoulsy defined.
Turn the encoder to select the desired option. Press the encoder key to confirm
the storing action. Press the MENU key to cancel the action.
Load C/N & Echoes: Allows to load the previously stored settings.
06/2006 Page 7