IWS iQ Travel Case 20 Instrucciones Para El Usuario página 5

STEP 4 - Transportation.
• A fully laden iQ Travel Case 20 with 20 devices and accessories weighs over 20kg and therefore should
be lifted only by two or more persons.
• Before moving ensure all four latches are completely closed. The air vent should be kept firmly
closed and only released if the iQ Travel Case 20 is subject to large changes in air pressure e.g. on an
aeroplane.
• For mobility the iQ Travel Case 20 is fitted with a retractable handle and smooth running castors. Simply
lift the iQ Travel Case 20 onto the castor end and extend the handle, then it can be easily wheeled to
the chosen operating area.
• When opening ensure the iQ Travel Case 20 is laying down (label facing upward) so that nothing falls
out when the lid is opened.
Note: Refer to the specifications diagram for an illustration.
STEP 5 - Security.
The iQ Travel Case 20 can be locked using one or two padlocks secured through the locking hole.
Note: Refer to the specifications diagram for an illustration.
STEP 6 - Other features.
• The iQ Travel Case 20 has a dust and water resistant seal in between the lid and the case body. If this
seal is damaged replace immediately to continue protection against dust and water. The seal requires no
maintenance other than cleaning with a damp cloth if it gets dirty – do not use chemical cleaners.
• The castors are ball-bearing type and require no maintenance.
• Three folding handles allow the case to be picked up by more than one person.
INSTRUCTION MANUAL