Steren RM-090 Manual De Instrucciones página 25

C. Search for codes automatically
1. Manually turn on the device that you want
to control and direct the remote control at the
device's receiver.
2. Press the button corresponding to the
equipment to be controlled (e.g.: "TV1"), the LED
indicator will blink once.
3. Press and hold the "SET" button; press the
power button until the LED indicator lights up.
Release the "SET" button and the power button.
4. The LED indicator will start flashing. Automatic
search mode will begin to operate.
6. Check that the other control buttons work normally. If your device does not work properly
please repeat the steps 3 to 6.
5. When your TV or appliance is turned off,
press the "SET" button immediately to lock the
code.
9 9