Cleaning - Vornado EXO5 Guia Del Propietario

HOW TO USE
WALL MOUNT INSTALLATION
1. Locate the Key Holes (A) on the back of the product.
2. Find and mark two circles on the wall where the product
will be mounted. The circles need to be 5" apart from
center to center.
NOTE: Is it recommended to mount the EXO5 on a solid
surface or wall stud. Do NOT hang the product on the
ceiling. Use drywall anchors if a stud is not available.
3. Drill 2 #10 panhead screws into the wall (screws not
included). Screws should be weight rated for 10 lb
vertical load each.
4. Leave about ¼" of each screw exposed.
5. Place the wide portions of the Key Holes over the heads
of the 2 screws.
6. Slide the product down until the screws are inside the
narrow portion of the key holes and the product is
secured to surface.
Note: Hang product from sturdy location using large screws that will
support product. Be careful not to hang the product in such a way
that it prevents normal fan operation or damages the cord. Keep the
electrical cord safely routed to avoid being tripped over or pulled.
Avoid placing the product where it could be easily bumped.
14 English

CLEANING

A GRILL REMOVAL
Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons, ensure that fan is switched off and unplug the circulator before
removing grill.
1. Remove the 6 screws located on the front of
the grill.
2. Dust or wash the Front Grill with a mild
dishwashing soap. Do not place grill in the
dishwasher. The excessiveheat can distort the
plastic.
3. To reattach - align the 6 screw holes and
replace all the screws.
Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated
dust off the Front Grill and Air Inlets.
Note: The motor is permanently lubricated
and requires no oiling.
Screw
Screw
Screw
Screw
Screw
Screw
15
English