Safety Warnings For The Use Of Blowers - Truper SOPLA-600 Manual De Usuario / Instructivo De Usuario

Safety Warnings for
the use of Blowers
Before Operating the Tool
DANGER • Never use the tool when tired, sick or
under the effects of drugs, alcohol or medicin.
• Use the right clothes to operate the tool: tight clothes,
non-skid safety boots, heavy duty protection gloves, and
safety lenses with side protection under ANSI Z87.1
standard, as well as anti-dust mask or face mask to
prevent breathing damaging debris.
WARNING
• Remove any accessory or loose
clothes which could get caught in the motor. Put your
hair up above shoulders' level.
• Make sure the tool is in perfect conditions. Do not turn
ON is not properly adjusted or fully assembled to assure a
safe operation.
• Double check the tool is clean, dry and free of oil.
• Verify the work area is in an open and well ventilated
area.
• In extreme temperature, check there are no ice
formations o condensation on the tool.
• Make sure visibility and light conditions are adequate to
see clearly. Otherwise, do not use the tool.
When Operating the Tool
WARNING • Check the nozzle is not pointing
towards people or animals before starting the motor.
Never point the blower at people or animals.
• Hold the blower correctly and with both feet firmly
supported on the floor.
• Keep the tool away from flammable materials.
• Do not try to make adjustments to the tool while the
motor is running.
• Do not try to remove stuck debris from inside the pipes
or the blower when the motor is running. Disconnect the
tool before removing the material.
• Be aware of surrounding risks. Noise coming out from
the tool may prevent you from noticing.
After Operating the Tool
WARNING • Turn OFF the motor before putting
the tool to rest. Do not leave the motor running
unattended.
WARNING
• Do not leave the blower running onto
dirty surfaces or on the grass because it could pick up
residues which later could be thrown towards the
operator or third parties causing severe injuries.
• Service and repairs to the tool shall
CAUTION
only be carried out in a
Service Center.
Assembly Recommendations
WARNING • If there are missing parts do not run
the tool until replaced. Otherwise, the user may suffer
severe injuries.
WARNING • Do not try to modify the tool or
manufacture accessories that are not recommended.
Otherwise, the user may receive severe injuries. It also
makes the Warranty void.
Authorized
ENGLISH 5